vfms

Vector Fused Multiply Subtract (Double)

VFMS<c>.F64 <Qd>, <Qn>, <Qm>

Fused multiply-subtract (Double).

Details

Performs a fused multiply-subtract on 128-bit NEON registers: computes Qd = Qd - (Qn × Qm) for double-precision (F64) elements with a single rounding step. This VFPv4 instruction is more accurate than separate multiply and subtract operations. Floating-point exception flags in FPSCR may be set; condition codes N, Z, C, V are not directly modified.

Pseudocode Operation

Qd ← FPMulSubFused(Qd, Qn, Qm);

Example

VFMS.F64 q0, q1, q2

Encoding

Binary Layout
cond
1110
1
D
10
Vn
Vd
10
11
N
1
M
0
Vm
 
Format VFP Arith
Opcode 0x0EA00B40
Extension VFPv4 (Float)

Operands

  • Qd
    Destination 128-bit SIMD register
  • Qn
    First source 128-bit SIMD register
  • Qm
    Second source 128-bit SIMD register

Reference (Arm AArch32 ISA)

Instruction Forms

Encoding Instruction ISA Bit pattern
0xF2200C10 VFMS{<c>}{<q>}.<dt> <Dd>, <Dn>, <Dm> A32 1111001 | 0 | 0 | D | 1 | sz | Vn | Vd | 1100 | N | 0 | M | 1 | Vm
0xF2200C50 VFMS{<c>}{<q>}.<dt> <Qd>, <Qn>, <Qm> A32 1111001 | 0 | 0 | D | 1 | sz | Vn | Vd | 1100 | N | 1 | M | 1 | Vm
0x0EA00940 VFMS{<c>}{<q>}.F16 <Sd>, <Sn>, <Sm> A32 cond | 1110 | 1 | D | 10 | Vn | Vd | 10 | 01 | N | 1 | M | 0 | Vm
0x0EA00A40 VFMS{<c>}{<q>}.F32 <Sd>, <Sn>, <Sm> A32 cond | 1110 | 1 | D | 10 | Vn | Vd | 10 | 10 | N | 1 | M | 0 | Vm
0x0EA00B40 VFMS{<c>}{<q>}.F64 <Dd>, <Dn>, <Dm> A32 cond | 1110 | 1 | D | 10 | Vn | Vd | 10 | 11 | N | 1 | M | 0 | Vm
0xEF200C10 VFMS{<c>}{<q>}.<dt> <Dd>, <Dn>, <Dm> T32 111 | 0 | 11110 | D | 1 | sz | Vn | Vd | 1100 | N | 0 | M | 1 | Vm
0xEF200C50 VFMS{<c>}{<q>}.<dt> <Qd>, <Qn>, <Qm> T32 111 | 0 | 11110 | D | 1 | sz | Vn | Vd | 1100 | N | 1 | M | 1 | Vm
0xEEA00940 VFMS{<c>}{<q>}.F16 <Sd>, <Sn>, <Sm> T32 11101110 | 1 | D | 10 | Vn | Vd | 10 | 01 | N | 1 | M | 0 | Vm
0xEEA00A40 VFMS{<c>}{<q>}.F32 <Sd>, <Sn>, <Sm> T32 11101110 | 1 | D | 10 | Vn | Vd | 10 | 10 | N | 1 | M | 0 | Vm
0xEEA00B40 VFMS{<c>}{<q>}.F64 <Dd>, <Dn>, <Dm> T32 11101110 | 1 | D | 10 | Vn | Vd | 10 | 11 | N | 1 | M | 0 | Vm

Description

Vector Fused Multiply Subtract negates the elements of one vector and multiplies them with the corresponding elements of another vector, adds the products to the corresponding elements of the destination vector, and places the results in the destination vector. The instruction does not round the result of the multiply before the addition. Depending on settings in the CPACR, NSACR, HCPTR, and FPEXC registers, and the Security state and PE mode in which the instruction is executed, an attempt to execute the instruction might be undefined, or trapped to Hyp mode. For more information see Enabling Advanced SIMD and floating-point support.

Operation

if ConditionPassed() then
    EncodingSpecificOperations();  CheckAdvSIMDOrVFPEnabled(TRUE, advsimd);
    if advsimd then // Advanced SIMD instruction
        for r = 0 to regs-1
            for e = 0 to elements-1
                bits(esize) op1 = Elem[D[n+r],e,esize];
                if op1_neg then op1 = FPNeg(op1);
                Elem[D[d+r],e,esize] = FPMulAdd(Elem[D[d+r],e,esize],
                                       op1, Elem[D[m+r],e,esize], StandardFPSCRValue());

    else // VFP instruction
        case esize of
            when 16
                op16 = if op1_neg then FPNeg(S[n]<15:0>) else S[n]<15:0>;
                S[d] = Zeros(16) : FPMulAdd(S[d]<15:0>, op16, S[m]<15:0>, FPSCR[]);
            when 32
                op32 = if op1_neg then FPNeg(S[n]) else S[n];
                S[d] = FPMulAdd(S[d], op32, S[m], FPSCR[]);
            when 64
                op64 = if op1_neg then FPNeg(D[n]) else D[n];
                D[d] = FPMulAdd(D[d], op64, D[m], FPSCR[]);