rstorssp

Restore Shadow Stack Pointer

RSTORSSP m64

Restores SSP from memory token.

Pseudocode Operation

token ← [src]
// Validate token format; if invalid raise #CP
SSP ← token

Example

RSTORSSP [rbp-8]

Encoding

Binary Layout

ModRM

Format Legacy

Opcode F3 0F 01 /5

Extension CET-SS

Operands

dest
64-bit memory operand (quadword)

Reference

View in Intel® 64 and IA-32 Architectures SDM ↗ Intel® SDM

Instruction Forms

Opcode	Instruction	Op/En	64/32-bit Mode	CPUID	Description
F3 0F 01 /5	RSTORSSP m64	M	V/V	CET_SS	Restore SSP.

Description

Restores SSP from the shadow-stack-restore token pointed to by m64. If the SSP restore was successful then the instruction replaces the shadow-stack-restore token with a previous-ssp token. The instruction sets the CF flag to indicate whether the SSP address recorded in the shadow-stack-restore token that was processed was 4 byte aligned, i.e., whether an alignment hole was created when the restore-shadow-stack token was pushed on this shadow stack. Following RSTORSSP if a restore-shadow-stack token needs to be saved on the previous shadow stack, use the SAVEPREVSSP instruction. If pushing a restore-shadow-stack token on the previous shadow stack is not required, the previous-ssp token can be popped using the INCSSPQ instruction. If the CF flag was set to indicate presence of an alignment hole, an additional INCSSPD instruction is needed to advance the SSP past the alignment hole.

Operation

IF CPL = 3
IF (CR4.CET & IA32_U_CET.SH_STK_EN) = 0
THEN #UD; FI;
ELSE
IF (CR4.CET & IA32_S_CET.SH_STK_EN) = 0
THEN #UD; FI;
FI;

SSP_LA = Linear_Address(mem operand)
IF SSP_LA not aligned to 8 bytes
THEN #GP(0); FI;

previous_ssp_token = SSP | (IA32_EFER.LMA AND CS.L) | 0x02
Start Atomic Execution
restore_ssp_token = Locked shadow_stack_load 8 bytes from SSP_LA
fault = 0

IF ((restore_ssp_token & 0x03) != (IA32_EFER.LMA & CS.L))
THEN fault = 1; FI;      (* If L flag in token does not match IA32_EFER.LMA & CS.L or bit 1 is not 0 *)

IF ((IA32_EFER.LMA AND CS.L) = 0 AND restore_ssp_token[63:32] != 0)
THEN fault = 1; FI;      (* If compatibility/legacy mode and SSP to be restored not below 4G *)

TMP = restore_ssp_token & ~0x01
TMP = (TMP - 8)
TMP = TMP & ~0x07
IF TMP != SSP_LA

THEN fault = 1; FI;      (* If address in token does not match the requested top of stack *)

TMP = (fault == 0) ? previous_ssp_token : restore_ssp_token
shadow_stack_store 8 bytes of TMP to SSP_LA and release lock
End Atomic Execution

IF fault == 1
THEN #CP(RSTORSSP); FI;

SSP = SSP_LA

// Set the CF if the SSP in the restore token was 4 byte aligned, i.e., there is an alignment hole
RFLAGS.CF = (restore_ssp_token & 0x04) ? 1 : 0;
RFLAGS.ZF,PF,AF,OF,SF := 0;

Flags Affected

CF is set to indicate if the shadow stack pointer in the restore token was 4 byte aligned, else it is cleared. ZF, PF, AF, OF, and SF are cleared. C/C++ Compiler Intrinsic Equivalent RSTORSSP void _rstorssp(void *);

Exceptions

Protected Mode Exceptions

#UD If the LOCK prefix is used. If CR4.CET = 0. IF CPL = 3 and IA32_U_CET.SH_STK_EN = 0. IF CPL < 3 and IA32_S_CET.SH_STK_EN = 0. #GP(0) If linear address of memory operand not 8 byte aligned. If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. If destination is located in a non-writeable segment. If the DS, ES, FS, or GS register is used to access memory and it contains a NULL segment selector. #SS(0) If a memory operand effective address is outside the SS segment limit. #CP(rstorssp) If L bit in token does not match (IA32_EFER.LMA & CS.L). If address in token does not match linear address of memory operand. If in 32-bit or compatibility mode and the address in token is not below 4G. #PF(fault-code) If a page fault occurs.

Real-Address Mode Exceptions

#UD The RSTORSSP instruction is not recognized in real-address mode.

Virtual-8086 Mode Exceptions

#UD The RSTORSSP instruction is not recognized in virtual-8086 mode.

Compatibility Mode Exceptions

Same as protected mode exceptions. RSTORSSP-Restore Saved Shadow Stack Pointer Vol. 2B 4-599

64-Bit Mode Exceptions

#UD If the LOCK prefix is used. If CR4.CET = 0. If CPL = 3 and IA32_U_CET.SH_STK_EN = 0. If CPL < 3 and IA32_S_CET.SH_STK_EN = 0. #GP(0) If linear address of memory operand not 8 byte aligned. If a memory address is in a non-canonical form. #SS(0) If a memory address referencing the SS segment is in a non-canonical form. #CP(rstorssp) If L bit in token does not match (IA32_EFER.LMA & CS.L). If address in token does not match linear address of memory operand. #PF(fault-code) If a page fault occurs. RSTORSSP-Restore Saved Shadow Stack Pointer Vol. 2B 4-600